[ad_1]
I am having a problem with my exterior webcam not being acknowledged on my MacBook Professional. This began immediately a couple of days in the past. Listed here are the main points.
HARDWARE/SOFTWARE SPECS:
- Webcam: VicTsing PC317
- Pc: MacBook Professional (13-inch, M1, 2020)
- OS: Monterrey 12.5 (newest updates put in)
The webcam is plugged into the again of my Dell monitor, which is linked to a powered USB hub, which is plugged into the USB port on my Mac through an adaptor.
ISSUE AND TROUBLESHOOTING
- Webcam labored usually till a couple of days in the past.
- Then immediately it will not seem as an possibility when operating Google Conferences or Zoom.
- I attempted plugging and unplugging the system and restarting the pc – no luck.
- I attempted swapping it with the identical webcam that my spouse has, to see if it is a {hardware} challenge – her webcam would not work both. So this means it isn’t simply that my webcam broke immediately.
- I attempted plugging my exterior microphone into the identical port to see if the port was damaged, however the microphone works. So this means the difficulty will not be as a result of USB port on my show, the hub, the cables, or adaptors – since one other USB peripheral is working effective from the identical port.
- I checked in system report and I DO see the system displaying up beneath the USB part however NOT beneath the digicam part (solely built-in Facetime digicam seems there). So the system is detected – simply not as a digicam?
- I ran
grep -i camin Terminal and the digicam DOES present up there, listed as “lively, busy” (I am undecided of the importance of this).
NEXT STEPS
-
I am completely caught at this stage – it looks as if the system is detecting the digicam however will not present it as an accessible digicam within the functions the place I want it.
-
Any assist or options a lot appreciated.
[ad_2]