[ad_1]
Organising your DJI Avata 2 Drone for the primary time might be an thrilling expertise. On this tutorial, I’ll information you thru the steps to get your drone prepared for its maiden flight and share some ideas and tips to reinforce each your flight and digicam picture high quality.
If you’re nonetheless on the fence about whether or not it’s best to get the DJI Avata 2 FPV drone, take a look at my detailed evaluate: https://oscarliang.com/dji-avata-2/
In case you determine to get the DJI Avata 2, I like to recommend getting the Fly Extra Combo which comes with 3 batteries:
Listed below are the helpful equipment you may get on your Avata 2: https://oscarliang.com/dji-avata-2-accessories/
Step-by-Step Setup Information for Maiden Flight
Unboxing: Unbox your DJI Avata 2 and guarantee you will have all the mandatory parts: the drone, controller, batteries, charger, propellers, and documentation.
Charging: Cost the drone’s battery utilizing the included charger. It’s additionally a good suggestion to cost the controller and any spare batteries.
Energy On: Start by powering on the DJI Goggles 3, Movement Controller, and the Avata 2 Drone. Press the ability button as soon as lets you test battery voltage, and should you press and maintain the button down once more till all inexperienced LEDs gentle up, it activates the goggles.
Goggles Tutorial: The FPV Goggles will information you thru a tutorial explaining how one can navigate the menu and use the movement controller to manage your drone.
Activation: Earlier than your first flight, you want to activate the goggles (the drone and distant don’t require separate activation). Join the USB-C port of the goggles to a cellular machine, launch the DJI Fly App, and observe the prompts for activation. You’ll be able to obtain the app from DJI’s official obtain web page: https://www.dji.com/uk/avata-2/downloads
Alternatively, you need to use a pc by downloading and putting in the newest model of DJI Assistant 2 (Client Drone Sequence) from the identical hyperlink. In case you beforehand put in this for different DJI fashions just like the O3 or unique Avata, make sure you replace to the newest model.
Firmware Replace: The app will immediate you to replace the firmware.
Linking: Usually, the drone ought to already be linked to the movement controller and goggles proper out of the field, eliminating the necessity for handbook pairing.
As soon as activated and up to date—a course of that ought to take not more than 10-Quarter-hour—you’re prepared for takeoff.
Flying Avata 2 with Movement Controller
For inexperienced persons, the Movement Controller would possibly really feel overwhelming as a result of there are such a lot of buttons. Even for skilled pilots, it takes some getting used to. Listed below are the fundamentals to get you began:
- Arm the drone: Double-press the lock button to arm the drone, motors will begin spinning.
- Disarm: Double-press the lock button once more to disarm, the motors will cease.
- Takeoff: With the drone armed, press and maintain the Lock button to provoke takeoff. The plane will ascend to about 1.2 meters and hover.
- Braking: Throughout flight, press the lock button to make the plane brake and hover in place. Press it once more to renew flying.
- Touchdown: To land, press and maintain the lock button whereas the plane is hovering. It’ll land mechanically and shut off the motors.
- Digicam Management: Modify the digicam angle by tilting the movement controller up or down.
- Yaw Management: Gently press the set off and tilt the distant left or proper to pan the drone.
- Lateral Motion: Use the joystick to maneuver the drone left or proper. Pushing it up or down adjusts the drone’s altitude, ascending or descending at about 1 meter per second.
- Ahead Flight: To maneuver ahead, merely press the set off all the best way.
- Flying Up and Down: For upward or downward flight, press the set off absolutely and tilt the controller up or down.
Superior Flying Methods
By default, your DJI Avata 2 shall be in Newbie mode, which is designed to be very gradual and secure for brand new pilots. On this mode, you possibly can’t change flight modes, which helps stop accidents when you’re nonetheless studying. Nevertheless, as soon as you’re feeling assured with the fundamentals, you’re able to take the following step.
Switching Off Newbie Mode: Go to Settings -> Management to show off Newbie mode. This may unlock the drone’s full capabilities and mean you can change between completely different flying modes.
Sport Mode: By urgent the flight mode button, you possibly can activate Sport mode. Consider it as Regular mode with a major pace enhance. It’s excellent for whenever you desire a bit extra pleasure and an opportunity to actually see what your drone can do.
Turtle Mode: In case you’re conversant in Betaflight, you’ll respect Turtle mode. This setting helps the Avata 2 get well from crashes by flipping itself right-side up. It’s extremely helpful in case your drone finally ends up the wrong way up after a mishap, saving you a visit to retrieve and manually reset it. You could find Turtle Mode within the Settings Menu.
Actual-time Stay View
By double tapping actually exhausting on the proper facet of the goggles, you possibly can activate realtime reside view of your surrounding utilizing the 2 entrance going through cameras.
By default it’s on 2D mode which solely makes use of one of many two cameras. You’ll be able to set it to 3D within the Settings-> Show which makes use of each cameras and truly improves usability IMO.
Head Monitoring
Head Monitoring is an enchanting characteristic that enhances your flying expertise by linking digicam motion to your head actions. Right here’s the way it works:
To allow Head Monitoring, go to the highest menu of your Goggles. This enables the digicam gimbal to maneuver up and down as you progress your head up and down. Once you look left or proper, the drone will pan in that course (because the gimbal doesn’t transfer in horizontal axis).
Initially, controlling the digicam together with your head whereas directing the drone with the movement controller would possibly really feel a bit unnatural. Nevertheless, with some observe, you possibly can obtain dynamic and artistic photographs which are tough to duplicate with conventional controls.
It’s essential to say that Head Monitoring solely works with the Movement Controller and isn’t supported by the Distant Controller 3.
Return to Dwelling
Maintain down the flight mode button can activate return to residence (RTH) throughout flight. Throughout return to residence you possibly can acquire again management by urgent the Lock button. It’s very correct, touchdown inside 1 meter of the house level.
DJI Avata 2 additionally help Low Battery RTH and Failsafe RTH.
Linking Gadgets
Your Avata 2, distant, and goggles ought to be linked proper out of the field. Nevertheless, if you want to re-link them for any cause, right here’s how one can do it. Observe that there’s no devoted hyperlink button on the brand new units – to place them in hyperlink mode, you merely maintain the ability button for five seconds.
- Plane: With the drone powered on, press and maintain the ability button till you hear a steady beep, indicating the battery stage LEDs are blinking in sequence.
- Goggles: With the goggles powered on, press and maintain the ability button till the goggles begin to beep constantly.
- Completion: Linking is full when the beeping stops, and that the plane’s battery stage LEDs flip strong.
- Now repeat this for the distant, and the goggles.
Observe: There’s no must hyperlink the plane on to the distant as they impart by the goggles.
Firmware Replace
Personally I don’t rush to replace firmware – generally new firmware would possibly include some kind of new restrictions. I all the time wait and see what the neighborhood’s suggestions is earlier than updating.
After a firmware replace, all the time restart your plane, distant controller, and goggles earlier than takeoff. This ensures all new settings take impact appropriately.
Vital: Firmware updates can reset flight parameters like RTH Altitude and Most Flight Distance. Make sure that to notice your most well-liked settings beforehand and reapply them post-update.
If the replace fails, restart the plane, distant controller, goggles, and both the DJI Fly app or DJI Assistant 2 (Client Drone Sequence). Then, try the replace once more.
FCC Unlock
Sadly DJI Avata 2 doesn’t help manually switching amongst FCC, CE, and SRRC. The plane will establish the nation and area the place it’s positioned in line with the situation of the cellular machine and the GPS of the plane, and change between FCC, CE, and SRRC following native legal guidelines and laws.
Whereas the ham file hack doesn’t unlock extra channels because it used to within the unique Avata and Goggles 2, it does improve RF output energy, permitting the drone to function in what seems to be an FCC RF energy mode. This hack additionally unlocks the pace limitations within the EU.
Merely get the file “ham_cfg_support” and unzip it to the basis listing of the SD card and put it within the DJI Goggles 3. Obtain right here: https://drive.google.com/file/d/1ug2U_i5kdrKQQ2I17NLJBXm2tKQeNj5Q/view?usp=share_link
There are third get together apps that may unlock FCC mode on the Avata 2, however they aren’t free. You can too strive a free app known as B3YOND however unavailable on iOS and works in older Android variations.
Greatest Transmission Settings
For CE customers, channel mode is about to Auto and can’t be modified, so you possibly can skip to the following part.
For FCC customers, the next are my really useful transmission settings.
Channel Mode: Set to Handbook to achieve full management over transmission settings.
Frequency: Select between 2.4GHz or 5.8GHz. 2.4GHz for higher penetration by obstacles however restricted to 1 pilot at a time as a result of its slim bandwidth (just one channel obtainable). It additionally interferes with 2.4GHz radio hyperlinks reminiscent of ExpressLRS, so DO NOT use 2.4GHz whenever you or different pilots are utilizing 2.4GHz radio hyperlinks. 5.8GHz is preferable should you plan to fly with others, because it gives a lot wider bandwidth. Relying on interference, you could discover one frequency gives higher sign than the opposite, if doubtful, strive each and evaluate bitrate.
Bandwidth: Larger bandwidth offers higher picture high quality however will increase the probability of interference with different pilots. When flying solo, you possibly can safely use 60MHz or 50MHz. When flying in teams, think about decreasing the bandwidth to 50MHz, 40MHz, and even 20MHz to attenuate interference.
Utilizing 5.8Ghz, it’s best to have 3 channels with 60MHz and 50MHz bandwidth. In case you solely have 1 channel obtainable, you need to use the “ham file” hack to unlock the remainder of the channels, obtain the ham file and place it within the root listing of your goggles SD card: https://oscarliang.com/dji-fpv-system-fcc-700mw/#DJI-Goggles-2-and-O3-Air-Unit
Greatest Digicam Settings
To get probably the most out of the DJI Avata 2, I’ve discovered these digicam settings produce nice outcome for video high quality.
For greatest flying expertise and don’t care a lot about recording:
- Mode: Auto
- Decision: 1080p 100FPS
- Shade: Normal
For greatest cinematic footage:
- ND filter is a should, see why: https://oscarliang.com/nd-filter-fpv/
- Mode: Handbook
- ISO: 100 (or as little as attainable relying in your lighting), or Auto (then set Max ISO to 400 or 800 for additional flexibility)
- Decision: 4K 60FPS (Keep away from 30FPS as a result of latency is just too dangerous for flying)
- Shutter Velocity: 1/120
- WB: Put White Stability on Auto first and see what the system select, then lock in with that worth, so WB is fastened throughout flight
- FOV: Large
- Shade: D-Log M (should you colour grade), or Normal (should you don’t colour grade)
- EIS: OFF (should you use Gyroflow), or Rocksteady
- Sharpness: -1 (you possibly can enhance sharpness in submit)
- Noise Discount: 0 (or +1 for lowlight reduces noise at midnight space)
For stabilization, the Avata 2 gives three modes: RockSteady, HorizonSteady, and Off. RockSteady is the default setting, offering sturdy stabilization. You’ll be able to change this within the Settings > Digicam > EIS menu of the goggles. In case you favor to stabilize footage post-flight, disable EIS and set the digicam to extensive mode to help Gyroflow offline stabilization.
Native facet ratio is 4:3, by switching to 16:9 it has the highest and backside cutoff.
Some testing on Noise Discount worth, has an impression on shadow element and lowlight.
Some comparability on sharpness worth, personally I favor -1, however that’s private choice.
Video bitrates beneath completely different decision/body price:
- 4K 60fps: 130Mbps
- 4K 50fps: 120Mbps
- 4K 30fps: 90Mbps
- 2.7K 60fps: 100Mbps
- 2.7K 50fps: 90Mbps
- 2.7K 30fps: 70Mbps
- 1080p 120fps: 80Mbps
- 1080p 100fps: 70Mbps
- 1080p 60fps: 50Mbps
- 1080p 50fps: 40Mbps
- 1080p 30fps: 25Mbps
Methods to Use Distant Controller 3
The Distant Controller 3 lets you fly in full handbook mode. It’s good to activate the RC3 first and replace its firmware through the DJI Fly App or DJI Assistant 2 earlier than utilizing it.
To hyperlink the Distant Controller 3 to your DJI Goggles 3, observe these directions:
- Goggles: With the goggles powered on, press and maintain the ability button till the goggles begin to beep constantly.
- Distant: With the distant powered on, press and maintain the ability button till it begins beeping.
- Completion: Linking is full when the beeping stops, and that the plane’s battery stage LEDs flip strong.
Observe: the Movement Controller will nonetheless work together with your drone, however you possibly can solely use one controller at a time, depends upon which one connects to the Goggles 3 first.
Assign handbook mode to the mode button: Within the Goggles Settings->Controls->Distant Controller->Button Customization, set Customized Mode to Handbook Mode.
In case you intend to fly in handbook mode, be sure that to take away throttle stick self centering. By eradicating the again deal with rubber, you will see that two screws – tighten each screws will take away throttle stick self centering. By loosening or tightening each screws barely adjusts the friction, takes a little bit of trial and error to get it proper.
You’ll be able to change between Regular/Sport/Handbook flight modes utilizing the mode button.
To arm and disarm the drone in Regular/Sport modes, use these stick positions.
To arm and disarm the drone in Handbook mode, double press the Begin/Cease button. You’ll be able to regulate the digicam angle utilizing the highest left rotary change.
In case of emergency, you need to use the “Flight pause/Return to residence” button in any flight mode:
- Press as soon as the quad will cease and hover in place, and put it in Regular Mode.
- Press and maintain and it’ll activate return to residence; to cancel RTH, press it yet another time.
Set your charges and expo, I’m utilizing these for freestyle flying:
- 120/800/0.5
- 120/800/0.5
- 140/650/0.5
What to Do When Dropping Sign
Once you lose video, it’s probably that you simply nonetheless have RC sign. Due to this fact It’s greatest to let go of the sticks; the Avata 2 ought to provoke return to residence mechanically.
Different Suggestions and Tips
When flying over the altitude peak restrict, the drone will go into Regular mode and gained’t allow you to fly any larger. You’ll be able to enhance the peak restrict as much as 500 meters (in Settings->Security), however it’s best to observe your native laws. There’s no strategy to take away the altitude restrict, in order that’s one other draw back in comparison with an FPV drone.
The DJI Avata 2 features a useful ‘Discover My Drone’ characteristic. To entry it, navigate by the goggles menu to Settings > Security > Discover My Drone. This characteristic reveals video footage from the 30 seconds earlier than the drone was misplaced, aiding in its restoration. The footage is saved in inside reminiscence so SD card isn’t required. Moreover, if the drone nonetheless has battery energy, you possibly can activate the ESC Beeping perform beneath the identical menu to make the drone’s motors beep, serving to you find it by sound.
A helpful trick for goggle customers: place a bit of tape on the sensor between the lenses. This prevents the screens from turning off whenever you take away the goggles, avoiding the temporary delay when turning them again on.
Battery charging: as quickly as you insert the batteries into the charging hub, it’s going to begin charging mechanically. It’ll all the time begin with the one with highest energy stage so it finishes faster. If all of your batteries are low in energy stage, you possibly can switch the remaining cost into one single pack so you possibly can fly a bit longer – merely insert all of the batteries within the hub, press and maintain the ability button till the LED turns inexperienced. To cease, press and maintain the button once more.
To cost batteries within the area, I’ve been utilizing the Speedybee Discharger with a giant 6S 10000mah LiPo. This is sufficient to recharge 6 of the Avata 2 batteries.
File Switch
Transferring information to a telephone:
The Avata 2 facilitates file switch through Wi-Fi by the DJI Fly app. Merely energy on the drone, activate the QuickTransfer perform within the app, and make sure that the drone and telephone are inside 2 meters of one another with out obstructions.
Transferring information to a pc:
Join the drone to your laptop utilizing a USB cable with out powering on the Avata 2, an exterior drive ought to seem. If utilizing a reminiscence card, you possibly can immediately insert the cardboard into your laptop’s card reader.
Stay Feed Sharing (Video Out)
Stay feeds might be shared in 3 ways:
- Wi-Fi wi-fi sharing: Allow display screen sharing from the DJI Goggles 3 to a cell phone through Wi-Fi. Join the cellular machine to the Goggles 3 through Wi-Fi and use the DJI Fly app to view the drone’s reside feed. This technique helps connection to just one cellular machine. The latency is over 100ms, so it’s not very best for flying utilizing this feed, however adequate for spectating. If that is too uneven, think about using a USB wired connection.
- Wired sharing: Join a cellular machine to the DJI Goggles 3 utilizing a knowledge cable and an OTG adapter. The related cellular machine will show the drone’s reside feed through the DJI Fly app. Like Wi-Fi sharing, this technique helps just one machine. Latency is far decrease than WiFi.
- Viewers mode: Activate the printed perform within the DJI Goggles 3 menu, permitting a number of goggles to obtain the reside feed and not using a viewer restrict. That is very best for sharing the flying expertise with an viewers.
Observe: Take into account that you possibly can solely use one sort of connection at a time, whether or not connecting to goggles or a cellular machine.
Conclusion
By following these setup steps and ideas, you’ll be able to seize beautiful aerial footage together with your DJI Avata 2 Drone. Take pleasure in your flight!
Edit Historical past
- Apr 2024 – Directions written for the evaluate of the Avata 2.
- Aug 2024 – Created a separate submit for this setup information.
[ad_2]